Product Introduction
Product Introduction
The product is formulated by heat stabilizer, high temperature anti-oxidant, detergent dispersing agent, anti-rust agent and
other functional additives.
For example, 0.7-1.0% complexing agent may be added into the proper base oil to prepare heat transfer fluid conforming to
ISOLQC Standard.
ISOLQC heat transfer fluid is used in the forcible closed cycle system with the general oil temperature not exceeding
320℃ and the heat source contact surface not higher than 360℃ interface temperature.
The product quality enjoys the same level as Mobil therm600、Mobil therm605 from Mobil company and Esso therm 500
mineral oil type heat transfer fluid from Esso in the US.
Recommended dosage: 320℃ 0.7-1.0%
Main properties
1.Sound oil solubility: when mixed with refined mineral oils and synthetic oils, it is of excellent intermiscibility and the
prepared heat transfer fluid is homogeneous without different layers and sedimentations.
2.Excellent thermal stability: the prepared heat transfer fluid could be used for a long time at specified working
temperature range without decomposition and coking..
3.Terrific anti-corrosion property: as the product blended with the complex agent is identified as qualified after
the corrosive test, so no anti-corrosive measures need be adopted.
4.Good heat conductivity and high heat efficiency: Products blended with proper base oils are in the international level of
the same products.
5..No influence on the flash point and autoignition point of blended products. The product has no toxic side effect.