Rigorous inspection for inverters, servo drives and servo motors, stable and reliable performance

Clear guides, easy commissioning and parameter configuration

Prompt support and reliable after-sales guarantee

Transparent pricing, standardized contract & technical service

● Drives asynchronous & PMSM.

● Supports V/F, open-loop SVC & closed-loop FVC control.

● Built-in multi-speed, PID constant pressure water supply, speed tracking restart, dual motor parameter switch.

● RJ45 port, remote keypad support for easy on-site commissioning.

● Standard Modbus, optional PG card.

● Simple operation & clear parameters, easy setup for new users.

● Full protections: overcurrent, overvoltage, overload, earth fault, phase loss, stable operation.

● For wire drawing, printing & dyeing, woodworking, packaging, conveying, water supply, fans and other small & medium machinery.

【Power】2.2kw～160kw

● Drives asynchronous & PMSM, same software, parameter switching.

● V/F & simple vector control, stable low-speed torque.

● DIN-rail / screw mounting, compact size;

● Built-in multi-speed, simple PLC, PID for diverse processes.

● Rich I/O, switchable analog voltage/current;

● Auto parameter save, easy wiring & maintenance.

● Multi-protection: overcurrent, overvoltage, overload, overheat, short circuit; clear fault codes.

● For woodworking, textile auxiliaries, fans, pumps, packaging & light machinery.

【Power】0.4kw～7.5kw

● Drives asynchronous, PMSM & synchronous reluctance motors.

● Supports V/F, open-loop SVC and closed-loop FVC control.

● Same commissioning software for synchronous/asynchronous motors, switch via parameters.

● High low-speed torque in open loop, wide speed range, high-speed output available.

● Built-in tension control, brake logic, master-slave sync, fault limp, simple PLC, multi-motor parameter switch.

● RJ45 port, remote keypad support for convenient on-site commissioning.

● For machine tools, export equipment, wire drawing tension, high-speed spindle, harsh conditions & high-precision synchronization.

【Power】5.5kw～160kw

● Supports DTC & open-loop vector control.

● Drives asynchronous & PMSM; optional PG card for encoder closed-loop and position control.

● Fast sensorless torque response, low dependence on motor parameters.

● Built-in multi-speed, swing frequency, PID, mains-inverter switching, data logging.

● Modbus & CANopen, complete fault diagnosis, motor temperature protection.

● For winding, hoisting, PMSM direct drive and equipment requiring high dynamic torque performance.

【Power】2.0kw～160kw

● Cost-effective, compact structure, easy commissioning.

● Pulse control priority, analog speed/torque control for basic positioning.

● Fully sealed design for good protection.

● Standard RS485 communication.

● Built-in braking resistor to cut accessory cost.

● Complete fault protection and status monitoring.

● 5-digit LED display with integrated keypad.

● For feeding, simple conveyors and general packaging machinery.

【Power】220V：0.4kw～5.5kw

                 380V：3.0kw～7.5kw

● Integrated 3-axis design with high integration.

● Excellent synchronization and high linkage control accuracy.

● Three independent axes with separate modes, parameters and operation.

●CANopen communication supported.

● Simplified wiring, low failure rate and easy maintenance.

● Separate encoder and control signal ports for Axis A/B/C.

● 5-digit LED display with keypad.

● Suitable for XYZ tables, cartesian robots, dispensing, small engraving and multi-station special machines.

【Power】0.4kw～1.5kw

● 3× overload, configurable 2-stage filter for fast servo response.

● Multiple control modes with online switching.

● Standard RS485, pulse/analog ports, CANopen expandable.

● Compatible with absolute encoder; power-off position memory, battery alarm.

● Auto motor recognition, auto gain tuning, adjustable three-loop parameters.

● Dynamic braking, strong anti-interference, stable running.

● Real-time load monitoring & fault record check.

● Built-in regenerative resistor.

● 5-digit LED with keypad.

● For robotic arms, packaging, machine tools and mid-to-high-end automation.

【Power】220V：0.4kw～5.5kw

                 380V：3.0kw～22kw

● Dual-axis design, space-saving with less wiring.

● Independent closed-loop control, excellent synchronization.

● Shared DC bus for energy saving and lower system cost.

● Separate control calculation, no mutual interference between axes.

● CANopen communication supported.

● Separate encoder and control signal ports for Axis A/B.

● 5-digit LED with onboard keypad.

● Suitable for XY tables, dual-axis handling, gantries, dual-axis feeding systems.

【Power】0.4kw～1.5kw

● Supports 17-bit magnetic absolute encoders, auto-adapts absolute motors.

● Multi-function I/O, sink/source selectable; 5V/24V pulse, built-in 24V supply, good anti-interference.

● Fully sealed, industrial power module, high overload, compact size.

● Integrated position/speed/torque control, great low-speed torque & dynamic response.

● Pulse command and RS485 communication supported.

● Multi fault protection and status monitoring

● 5-digit LED display with keypad.

● Suitable for single & few-axis general automation equipment.

【Power】0.4kw～1.5kw

● HS100E series adds EtherCAT bus function based on HS100 series.

● EtherCAT slave, 100Mb/s for real-time servo control and data transmission.

● Daisy-chain networking, supports CSP/CSV/CST/PP/PV/PT/HM modes.

● Multi-axis real-time synchronization, less wiring and higher reliability.

● 5-digit LED display with keypad.

● For multi-axis linkage, robotic arms, multi-station machines and automation lines.

【Power】0.4kw～1.5kw

● VFD specially for screw air compressors.

● 2kHz~8kHz carrier auto-adjusts with load to reduce motor noise.

● Simple wiring, fast response, stable constant pressure with small fluctuation.

● Multiple motor protections for longer service life.

● High power factor, low loss and remarkable energy saving.

● High starting torque, stable operation and strong environmental adaptability.

● Vector control algorithm, excellent dynamic performance and strong overload capacity.

● Built-in dedicated pressure PID for steady air supply pressure.

● Modbus supported for network monitoring.

● Multi-protection against phase loss, overcurrent, overvoltage, overheating for safety.

【Power】7.5kw～160kw

● All-in-one compressor drive, wall-mounted, anti-misplug terminals, easy commissioning.

● Supports synchronous & asynchronous motors, dual-use.

● Bilingual touchscreen for visual operation.

● Built-in 220VAC, 24V output and contactor, high integration.

● PT100/PTC motor temperature protection.

● Modbus for upper computer monitoring.

● Sleep/wake function, low noise and energy efficient.

● Pressure PID control for stable air supply.

● Soft start reduces inrush current.

● Auto speed adjustment by air demand to save energy.

● Graded fault protection to cut downtime loss.

【Power】7.5kw～37kw

● Integrated servo drive + PLC for efficient all-in-one control.

● High performance, reliable, compact and highly integrated.

● Compact size, customizable functions for special machine development.

● Rich interfaces, easy programming; pulse and Modbus supported.

● Complete fault protection, status monitoring and pulse interference resistance.

【Power】0.75kw～1.5kw