HP01 Series
HVAC&R Pressure Transducers
The HP01 series is specially designed for use in high- pressure and low-pressure HVAC&Refrigeration applications, in the most demanding environments, where low cost is needed yet maintaining high accuracy, long term reliability, and long life. This series is compatible with all refrigerants. Metal seal without O-ring that prevent leaking risk under very low temperature and strict environment.
Applications
HVAC/R
Heat Pumps
Hydraulics
Commercial Refrigeration
Freezing & Refrigeration
Compressor
Features
High Accuracy ±0.25%
±1% TEB (Total Error Band)
Wide Temperature Range -40~125℃
Oil-filled Sensing Technology
Harsh Media Compatibility
Integrated Connector or Flying Leads
Rugged Design for Outdoor Use
Analog voltage or current output
Downloads
HP01 HVAC/REFRIGERATION PRESSURE SENSOR DATASHEET
4.5 VDC to 5.5 VDC
Specifications
Supply Voltage (VIN)
Overvoltage Protection
Supply Current
Output Voltage (VOUT)
Response Time
Output Load
8 mA max @ 5 VDC with no load
0.5 VDC to 4.5 VDC typical
10K ohms min
2 ms, additional options available
6 VDC
EMC (IEC62000-4-20)
ESD (IEC61000-4-2)
± 8KV Contact Discharge
± 15KV Air Discharge
Short Circuit Protection
Yes
Iusulation Resistance
> 100MΩ at 500VDC
Dielectric Strength
Leakage current≤0.75mA @ 1.8kVAC, 1s
0-50 psi (0.35MPa) through 0-725psi (5MPa)
TECHNICAL SPECIFICATIONS
Pressure Range
Burst Pressure
Operating Temperature
Performance Accuracy
Proof Pressure
Storage Temperature
-40°C to 125°C (-40°F to 257°F)
± 1% F.S. typical over -25°C to 125°C
-40°C to 150°C (-40°F to 302°F)
2X rated pressure range
3X rated pressure range
Approvals and Marks
Wetted Materials
304L Stainless Steel
Brass/copper or Other materials available
Cycle Life
10 million cycles zero to full scale
Vibration
5g (33Hz)
100 V/m
Electrical Connection
IP66 (Connector version) or IP 67 (Cable version)
ELECTRICAL SPECIFICATIONS