Why Toy MOQs Are Nothing Like Craft MOQs
A buyer who has sourced craft kits before will often assume a toy supplier should be able to do 300 pieces. Sometimes we can. Often we cannot, and the reason has nothing to do with willingness.
It is about how the object is made. Five toy processes produce five completely different minimum order quantities, and understanding the ladder saves a lot of wasted emails.
The ladder
Process | Setup cost | Typical MOQ | Why |
Printed paper / card | Low | 500 – 1,000 | Plate and die cost amortises fast |
Wood, cut and painted | Low–moderate | 500 – 1,000 | Jigs and paint batches, mostly labour |
Felt, sewn and stuffed | Low | 300 – 500 | Labour-intensive, no tooling |
Injection moulded plastic | High | 2,000 – 5,000 | Mould cost must spread across units |
Electronic / battery | Highest | 3,000 – 5,000 | Tooling plus certification per SKU |
Why the mould changes the arithmetic
An injection mould is a fixed cost. It does not care how many units you order. At 1,000 pieces the tooling might add several dollars per unit; at 10,000 it adds cents.
There is a second variable most buyers never see: cavity count. A single-cavity mould makes one part per cycle and is cheap to build. A four-cavity mould costs more but produces four times as fast, which lowers the unit price and raises the minimum order that makes sense. Choosing cavity count is a negotiation between your order volume and your unit cost, and it is worth having that conversation before the mould is cut rather than after.
What to do with a small first order
Do not open a mould to test a market. Use the bottom of the ladder first.
Validate with the cheap processes. Paper, wood, felt and printed components can produce a real, sellable toy at 500 pieces. If the concept works, the sell-through will tell you whether it deserves tooling.
Validate the concept, not the final form. A wooden version and an injection-moulded version of the same toy can test the same idea. The first costs a fraction of the second and ships in a third of the time.
Negotiate the second order, not the first. Suppliers price small runs defensively. The moment you can commit to a second run, the conversation changes — often more than the first order's price suggests.
The honest version of "we can do low MOQ"
Any supplier can accept a small order. The question is what they do with it: run your 300 pieces on the same line as a 5,000-piece order at the end of the shift, or set up properly and lose money.
We will tell you which of those is happening. If your quantity only works with a compromise — a different material, a simplified component, a longer lead time — we will say so at the quote stage rather than at the inspection.
Give us the number you can actually commit to and the retail price you need to hit. The gap between those two numbers is the real conversation, and it usually has more solutions than buyers expect.