HPA011QC
Handpiece With Quick Coupling
Handpiece With Quick Coupling:M4/B2
Chuck Type:Push button
Bearing:Ceramic bearing
Workign Air Pressure:0.20-0.25MPa(0.22MPa prefrred)
Rotation Speed:350,000-400,000R.P.M(Standard Head); 280,000-320,000R.P.M(Torque Head);
Bur Applicable:Φ1.595-1.600mm
Spray:triple water spray
Product Parts:
Consists of handpiece head, handle, caudal thread, cartridge.
Working Conditions:
1.Air pressure 0.25~0.30mpa,must be filtrated.
2.Use high speed dental bur with shaft diameter Φ1.59~1.60mm×21-23mm and roghtness less than 0.8um.
3.The amount of handpieces spray or water spray should be able to adjusted.
4.Hard glass fiber,can be repeatedly sterilized in high temperautre and pressure.
Product Scope:
Only used for drilling, molar of stomatology clamping high-speed dental burs.
HPA011QC Handpiece we Provide Two Kind Of Head For Choice
HPA011SQC | HPA011TQC |
Standard Head | Torque Head |
Connect the tubing(4 or 2 or 6 hole) if appears quick coupling handpiece, insert the quick coupling head in to, installation as shown photo:
Notice:1.Connect the required tubing according the model of each handpiece.
Handpiece With Quick Coupling
2.Only connecting correctly,fixed tightly and closely, can be used.
1.Inset quick couping
Insert quick coupling into socket connection of the high speed handpiece, push it forward,card tightly and firmly.
Notice:For quick coupling with decorative pattern, should be moving back before push forward, the can be card tightly and firmly
2.Extract the quick coupling
Hold the handpiece body and quick coupling by hands and drag them into opposition.
Notice:For quick coupling with decorative pattern, holding the decorative patten quick coupling, drag it in to behing.
Note:Only connecting correctly, fixed tightly and closely, can be used.