Essential details
Shipping:Land freight, Ocean freight
Product Introduction
This product offers excellent processing characteristics and a maximum operating temperature of 105°C. Finished wires meet the JB/T 10491.2 standard and comply with environmental regulations such as RoHS and REACH.
**Applicable Standard**
The material complies with the GB/T 32129 standard.
The material complies with the GB/T 32129 standard.
**Processing Guidelines**
It is recommended to use a specialized single-flight screw (constant pitch, variable depth) for low-smoke, halogen-free materials, with a compression ratio of 1.5 ± 0.2. Screw speed should be controlled to avoid excessive rates. Do not use BM-type screws. A 60-mesh screen is recommended for the breaker plate. Pressure-type tooling should be used for small-gauge wires, and the melt temperature should not exceed 170°C (refer to the extrusion temperature profile).
It is recommended to use a specialized single-flight screw (constant pitch, variable depth) for low-smoke, halogen-free materials, with a compression ratio of 1.5 ± 0.2. Screw speed should be controlled to avoid excessive rates. Do not use BM-type screws. A 60-mesh screen is recommended for the breaker plate. Pressure-type tooling should be used for small-gauge wires, and the melt temperature should not exceed 170°C (refer to the extrusion temperature profile).
| Location | Barrel Zone I | Barrel Zone II | Barrel Zone III | Barrel Zone Ⅳ | Die head mold |
| Temperature (°C) | 100±10 | 120±10 | 135±5 | 145±5 | 150±10 |
Due to the product's specific structure, pre-crosslinking may occur if the material remains in the barrel for an extended period. Customers are advised to avoid prolonged residence times in the machine. If pre-crosslinking occurs due to stagnation, purge the material from the machine; normal operation will resume upon reloading fresh material.