Essential details
Shipping:Land freight, Ocean freight
Product Introduction
This product offers excellent processing characteristics and a maximum operating temperature of 125°C. It complies with relevant environmental regulations such as RoHS and REACH, and meets the ISO 6722 standard.
Implementation Standard
The material complies with the ISO 6722 standard.
The material complies with the ISO 6722 standard.
**Processing Guidelines**
It is recommended to use a specialized single-flight screw (constant pitch, variable depth) for low-smoke, halogen-free materials, with a compression ratio of 1.5 ± 0.2. Screw speed should be controlled to avoid excessive rates. Do not use BM-type screws. A 60-mesh screen is recommended for the breaker plate. Pressure-type tooling should be used for small-gauge wires, and the melt temperature should not exceed 170°C (refer to the extrusion temperature profile).
It is recommended to use a specialized single-flight screw (constant pitch, variable depth) for low-smoke, halogen-free materials, with a compression ratio of 1.5 ± 0.2. Screw speed should be controlled to avoid excessive rates. Do not use BM-type screws. A 60-mesh screen is recommended for the breaker plate. Pressure-type tooling should be used for small-gauge wires, and the melt temperature should not exceed 170°C (refer to the extrusion temperature profile).
| Location | Barrel Zone I | Barrel Zone II | Barrel Zone III | Barrel Zone Ⅳ | Die head mold |
| Temperature (°C) | 100±10 | 120±10 | 135±5 | 145±5 | 150±10 |
Due to the product's specific structure, pre-crosslinking may occur if the material remains in the barrel for an extended period. Customers are advised to avoid prolonged residence times in the machine. If pre-crosslinking occurs due to stagnation, purge the material from the machine; normal operation will resume upon reloading fresh material.