Isingeniso Somkhiqizo – Umshini Wokukhiya Okuzenzakalelayo Kwamalebula Okuxhuma

I-Ushini wokukhiya izintambo zokunamathisela ngokuzenzakalelayoyakhelwe ukunamathisela amathegi okuxhonywa ngendlela ephumelelayo neyenzakalelayo. Isekela ukudla okuzenzakalelayo, ukubeka amathegi okuxhonywa okuzenzakalelayo nokujikeleza. Uhlelo lungalungiswa kumamodi wekhadi elilodwa, amakhadi amabili, amakhadi amathathu, noma amakhadi amane. Inikeza kokubili ukusebenza okuzenzakalelayo ngokuphelele nokusebenza okuyingxenye okuzenzakalelayo (i-foot-pedal), nokulawulwa kwejubane okuguquguqukayo. Isikhombimsebenzisi sesikrini sokuthinta esisebenziseka kalula senza kube nokwenzeka ukulawula okubonakalayo. Umshini owodwa ungathatha umsebenzi wabasebenzi abathathu—vele ubeke ithegi yokuxhonywa, ucindezele iswishi, futhi inqubo yokujikeleza ithegi yokuxhonywa iqedwa ngokuzenzakalelayo.

Lo mshini wehlisa izindleko zabasebenzi, unciphisa ukukhathala komsebenzisi, futhi uthuthukisa kakhulu ukusebenza komkhiqizo.

Kusetshenziswa kabanzi ezimbonini ezifana namathoyizi, izimpahla zasendlini, izingubo, izikhwama nezimpahla zokuhamba, amathuluzi ezinsimbi, imikhiqizo yezilwane ezifuywayo, izinto zobuciko, izinsiza, izigqoko, namagilavu.

1. Imisebenzi Eyinhloko

1. Inqubo Egcwele Yokuzenzakalela Yokubopha Amalebuli Okulenga

• Ukunikezwa Okuzenzakalelayo: Kuyasusa ukuhlungwa kwezitika zokulenga ngesandla; umshini uhambisa izitika zokulenga ngokuzenzakalelayo.
• Ukubeka Amalebuli Okulenga Ngokuzenzakalelayo: Amalebula okuxhuma abekwa futhi avikeleke endaweni echaziwe emkhiqizweni.
• Imodi Yamakhadi Amaningi: Sekela ukuxhunywa kwamalebula okuxhuma okukodwa, okubili, okuthathu, nokune.

2. Izindlela Zokusebenza Eziguquguqukayo

• Imodi Yokuzenzakalela: Ukuqala ngokuthinta okukodwa, inqubo egcwele ngokuzenzakalelayo.
• Imodi Engazenzakaleliyo (I-Foot Pedal): Ilawulwa iswishi yezinyawo ukuze kusebenze isikhathi esisodwa, ilungele ukulungiswa kahle noma ukukhiqiza okuncane.
• Ukulawulwa Kwejubane: Isivinini esilungisekayo ukuze sihambisane nezidingo zokukhiqiza.

2. Ukulawula Okuhlakaniphile Nokusebenza Kahle

1. Isikrini sokuthinta esibonakalayo

• I-UI ebonakalayo yokusetha amapharamitha (izindlela, isivinini, njll.), yehlisa izidingo zamakhono omsebenzisi futhi inciphise amaphutha.

2. Ukusebenza Kahle Kakhulu Nokunciphisa Abasebenzi

• Umshini Owodwa = Abasebenzi Abathathu: Inqubo egcwele ngokuzenzakalelayo inciphisa kakhulu ukungenelela ngesandla.
• Ucezu ngalunye luqukethe iziqinisekiso eziyi-100 (ezizobuyekezwa zibe yiziqinisekiso eziyi-5,000 kurolli ngayinye), esikhundleni senqubo yangaphambilini lapho umsebenzi ngamunye ebophela khona izitika zokulenga ngezandla ngezihlanganisi ngazinye. Lokhu kuthuthukisa kakhulu ukusebenza kahle kokupakisha futhi konga umsebenzi.
• Beka bese ucindezela: Abasebenzisi badinga kuphela ukubeka umkhiqizo bese becindezela iswishi, okunciphisa kakhulu umsebenzi nokukhathala.

3. Isicelo Esibanzi

• Ukuhambisana Nemboni: Ifanele amathoyizi, izingubo, imithwalo, izinto zokwakha, ubuciko, izinsiza, izigqoko, amagilavu, neminye imikhiqizo yezimboni ezilula.
• Ukusebenzisana nezinto ezisetshenziswayo: Ihambisana nohlobo lwamalebula ephepha, i-PVC, indwangu, nezinye izinhlobo.

4. Imininingwane Eyinhloko

Ubukhulu:cishe 48.5 cm (ubude) × 42 cm (ububanzi) × 66 cm (ukuphakama) (amamodeli anekhanda elilodwa kanye namakhanda amabili)

Isisindo senetha: cishe u-15 kg

1. Ingcindezi yomoya esebenzayo: ≤ 7 kg (0.7 MPa).
2. Ukuqeqeshwa komsebenzisi kuyadingeka ngaphambi kokusebenzisa; gwema ukusebenza ngokukhathala.
3. Ububanzi obunconyiwe bemvulo yesitika yokulenga: > 3.5 mm.
4. Gcina izinto ezisetshenziswayo ezingasala njengezinaliti zomshini wokulebula, izikhonkwane zokucindezela, nezikhala ezakhelwe ngaphakathi.
5. Isidingo sokuhlinzekwa komoya: isixhumi sombhobho womoya we-8 mm; ingcindezi yokuphuma ≥ 5.5 kg (0.55 MPa). Umthombo womoya wasefekthri kufanele udlule ku-0.55 MPa ukuze kusebenze kahle.
6. Ukunikezwa kwamandla: 220V, isokhethi eyodwa eneziphetho ezintathu.
7. Amathuluzi afakiwe: isethi yamathuluzi e-metric hex, isikrudruvha esiyisicaba esincane (ubukhulu bomkhono obungu-0.6 mm, ububanzi < 4 mm).
8. Indawo yokusebenza encane: 1.2 × 0.6 m ukuze kufakwe umshini.
9. Qaphela – indawo yokusika ummese: ingxenye engemuva yomugqa wokuqala wokubopha kufanele ibe cishe 1 mm ukusuka ebusweni bokugcina be-roller blade.
10. Ukuze uthole amathegi amade okuxhuma, lungisa umphetho ongaphezulu wethegi ukuze uvimbele ukuthi ingagudluki.
11. Ngesikhathi sokusebenza, ingaphezulu lomkhiqizo akumele libe phezulu kunezinga eliphezulu lenaliti.
12. Ukugcoba: Faka uwoyela ezingxenyeni ezihambayo/ezijikayo njalo ngenyanga noma njalo ngamareli angu-50 wezinto zokubopha.

Buka Ividiyo Yokusebenza (YouTube):

001      002      003