T2 Copper (equivalent to C11000)

Created on 11.17

What is T2 Copper?

T2 copper is an industrial pure copper, classified as red copper (named for its purplish-red appearance), also known as red copper or赤铜.
It complies with the Chinese national standard GB/T 5231-2022 "Wrought Copper and Copper Alloy Grades and Chemical Composition", which came into effect on October 1, 2022, replacing the previous 2012 and 2001 versions.
Internationally, T2 copper corresponds to the American ASTM standard C11000, which is electrolytic tough pitch copper (ETP copper). Their compositional requirements are essentially identical, allowing for mutual reference during procurement.
Composition and Performance Data
1. Chemical Composition:
The total content of copper plus silver in T2 copper is no less than 99.90%, with strict impurity control:
  • Bismuth (Bi): ≤ 0.001%
  • Antimony (Sb) and Arsenic (As): ≤ 0.002% each
  • Iron (Fe), Lead (Pb), and Sulfur (S): ≤ 0.005% each
2. Physical Properties:
  • Density:
Approximately 8.9 g/cm³ (can be used to estimate weight in structural design).
  • Thermal Conductivity:
Approximately 391 W/(m·K) at 20°C—second only to silver among all engineering metals, providing excellent heat dissipation.
  • Electrical Conductivity:
Can reach 100%+ of the International Annealed Copper Standard (IACS), typically achieving 101%–102% in practical applications, making it the preferred material for power transmission.
  • Melting Point:
Approximately 1083°C, with good high-temperature stability.
3. Mechanical Properties (Vary by Temper):
  • Soft (M):
Tensile strength ≥ 196 MPa, elongation ≥ 30%. Suitable for bending and drawing.
  • Half-Hard (Y2):
Tensile strength ~245–343 MPa, elongation ~8%–12%.
  • Hard (Y):
Tensile strength ≥ 343 MPa, elongation ≥ 3%. Suitable for maintaining shape and dimensions.
Precautions for Use:
Pay attention to hydrogen embrittlement. T2 copper contains trace amounts of oxygen. When processed or used in a reducing atmosphere at high temperatures (above 370°C), it is prone to hydrogen embrittlement (commonly known as "hydrogen disease"). In such cases, it is recommended to use oxygen-free copper (OFC) or deoxidized copper instead.
Tel
WhatsApp
Email