Emboss Type Waterproof Flexible Momentary Push Button For Testing Controller
 

Key Features

• Operation: The switch is active only during the press, which allows for quick and efficient operations.
• Types: Momentary push buttons can be normally open (NO) or normally closed (NC), depending on the desired circuit behavior.
• Durability: These switches typically have a higher durability due to less mechanical stress compared to latching switches, which maintain their position until toggled again.

Applications

• Industrial Use: Commonly used in machine control and automation systems where precise control is necessary.
• Consumer Electronics: Found in devices like keyboards, doorbells, and intercoms where short, transient inputs are required.
• Safety Systems: Often utilized in emergency stop buttons and other safety mechanisms that need immediate response.

Advantages

• Simplicity: Momentary switches are generally easier to install and maintain due to their straightforward design.
• Cost-Effective: They are usually less expensive than latching switches because of their simpler construction.

Membrane switch Performance Index
 

Product spec :
 
1)Material---for front or face overlay
Polyester
1.Highly versatile for embossing 2.Highly resistant to chemicals
 
3.Better durability 4.For internal and external use
Polycarbonate
1.Wide range of surface finishes and thicknesses
2.More cost-effective 3.For internal and external use
2) Embossing--rim embossing pillow embossing dim embpssing
Graphic overlays can be embossed in order to insert domes (tactile), leave space for mechanical keys and provide tactile indications Pedestal embossing
3)Windows ----for display function
1. print colors windows
2.transparent finishes windows
4)Keys/buttons
Tactile keys---with metal dome or poly dome
Non-tactile--silver printing spot
5) Embeded LEDs-
miniature LED, LED colors:white, yellow, orange, green, red, etc.
6)Cable
is an extension of the printed circuit and is used to communicate with your device
7)Types of connector
1.Zero insertion force (ZIF) connector; 2.Female connector; 3.male connector
8) EMI / RFI / ESD Shielding
use an aluminum foil shielding / a clear ITO electrical conductive polyester
9) Adhesive ----mostly used are 3M-double-side glue
10)Backplate---in aluminum, polycarbonate or acrylic