Blog | BAIFENG
Ozone systems · Water treatment · Since 2011
BAIFENG assembly workshop

Technical notes

Ozone, oxygen and water, explained.

Practical notes on disinfection, dissolved oxygen and equipment specification — written for project teams and buyers.

Stainless steel ozone generator

Ozone vs. traditional disinfection: where each works best.

Ozone is a strong oxidant that leaves no chemical residue. That makes it attractive for water, air and surface treatment — but it also means the dose, contact time and off-gas have to be engineered.

Here is how we decide where ozone fits, and where a conventional chemical or thermal step still does the job better.

What ozone does well

Ozone dissolves into water and reacts quickly with bacteria, viruses and many oxidisable contaminants. In air and enclosed spaces it can reach surfaces that are difficult to wipe. Because it decomposes back to oxygen, there is no residual chemical to rinse away.

Where the engineering matters

Ozone is not stored; it is generated on site. The gas source, dew point, cooling and contact tank determine how much ozone actually reaches the target. A generator that performs on the test bench can underperform if the feed gas is humid or the contact time is too short.

Ozone is a process, not a cartridge. The generator, gas preparation and contact stage have to be designed together.

For residual protection in a distribution network, a chemical step may still be required. For shock disinfection, surface treatment and process water, ozone is often the simpler route.

Micro-nano bubble generator with water sample

Micro-nano bubbles in aquaculture: what dissolved oxygen really changes.

Traditional aeration produces large bubbles that rise quickly and release most of their oxygen at the surface. Micro-nano bubbles are much smaller, with a larger surface area and a longer residence time in water.

Why the bubble size matters

Smaller bubbles create more gas-liquid contact area and stay in the water column longer. That improves oxygen transfer efficiency and helps maintain dissolved oxygen through the night and during high stocking density.

Beyond oxygen

  • Local oxidation can help break down some organic load
  • Bubbles attach to suspended solids and support separation
  • Improved dissolved oxygen supports aerobic treatment
  • Better water conditions reduce stress on fish and shrimp

The right configuration depends on pond volume, oxygen demand, power supply and whether the goal is emergency oxygen, daily conditioning or wastewater treatment.

Ozone disinfection cabinet

Specifying an ozone generator: gas source, cooling and control.

Two generators can look similar and perform very differently. The difference is usually in the feed gas, the discharge chamber and how the unit handles heat and moisture.

Gas source and dew point

Oxygen-source systems produce a higher ozone concentration than air-source systems, but the oxygen supply and dryer have to be specified. Moisture in the feed gas reduces output and stresses the discharge chamber.

Cooling and chamber design

The honeycomb discharge chamber is designed to remove heat and keep the gas path stable. Cooling method, gas pressure and enclosure ventilation all affect continuous running.

Control and protection

  • Automatic or programmable cycle control
  • Multi-stage electrical protection
  • Clear fault indication for service
  • Materials matched to the installation environment
Ozone equipment installed in a clean utility room

Keeping an ozone system safe and serviceable.

Ozone is generated on site and used immediately. The safety approach is therefore about containment, ventilation and maintenance access — not about storing a chemical.

Practical rules

  • Ventilate the generator room and monitor for leaks
  • Keep the feed gas dry and the cooling path clear
  • Inspect seals, tubing and electrical connections on schedule
  • Isolate and purge before service
  • Use suitable PPE when working near an operating system

A serviceable installation leaves room around the enclosure, labels the isolation points and keeps the manual with the unit. That is as important as the ozone output on the nameplate.

Technical questions

Need a second opinion on a system?

Send the water analysis, air volume or application details. We will review the configuration and reply with a recommendation.

Ask our team