Programmable Controls
UX1
Extra small size programmable controller
One build-in uni-polar EEV driver
6*AI, 2*AO, 6*DO,(6+4)*DI
3 RS485 serial ports
UX2
Small size programmable controller
Two build-in uni-polar EEV drivers
9*AI, 4*AO, 9*DO, (7+4)*DI
3 RS485 serial ports
UX3
Middle size programmable controller
Two build-in uni-polar EEV drivers
12*AI, 4*AO, 12*DO,(10+4)*DI
3 RS485 serial ports
Terminals
4.3Inch HMI
4.3 inch colorful touch display
Capacitive touch technology
Built-in Modbus RTU protocol
4G/5G and Wi-Fi connections available
7.0 Inch HMI
7 inch colorful touch display
Capacitive touch technology
Built-in Modbus RTU protocol
4G/5G and Wi-Fi connections available
Refrigeration Controls
RX33 Model M
100-240Vac switching power supply
Can be used as thermometer
One 12A relay for auxiliary output
Build-in RS485 serial port.
RX33 Model S
100-240Vac switching power supply
2 Relays: (12A: COMP. 8A: AUX.)
Aux. can be configured as alarm or light output
Build-in RS485 serial port.
RX33 Model Y
100-240Vac switching power supply
3 Relays: (12A: COMP. 8A: DEF, 8A:AUX)
Advanced defrost functions
Build-in RS485 serial port.
EEV Controls
EVDCool
Universal EEV controller for one uni-polar valve
Only need four parameters to start basic regulation
Build-in display and keypads
Supports 0.5V~4.5V/4~20 mA type pressure sensor
EVDPro
Universal EEV controller for one bi-polar valve
Only need four parameters to start basic regulation
Build-in display and keypads
Supports 0.5V~4.5V/4~20 mA type pressure sensor
EVDWell
Universal EEV controller for two uni-polar valves
Two valves can be regulated independently
Supports 43+ refrigerants
Supports 0.5V~4.5V/4~20 mA type pressure sensor
Speed Controls
DC Inverters
Single phase range from 1.3KW to 7KW
Three phase range from 5.5KW to 25KW
Filter board included for perfect EMC performance
Coating is used to cope with harsher environments
Single Phase Fan
Speed control in cut phase technology, Max 500W
Control signal can be NTC, 4/20mA , 0.5-4.5V,0-10V
Supports Modbus RTU as well
Able to work alone to control the pressure
Three Phase Fan
Speed control in cut phase technology
Control signal can be NTC, 4/20mA , 0.5-4.5V,0-10V
Support Modbus-RTU communication
Power range from 2.2KW to 10KW