This product offers excellent processing characteristics and a maximum operating temperature of 150°C. It complies with relevant environmental regulations such as RoHS and REACH, and meets the ISO 6722 standard.

Implementation Standard
The material complies with the ISO 6722 standard.

**Processing Guidelines**
It is recommended to use a specialized single-flight screw (constant pitch, variable depth) for low-smoke, halogen-free materials, with a compression ratio of 1.5 ± 0.2. Screw speed should be controlled to avoid excessive rates. Do not use BM-type screws. A 60-mesh screen is recommended for the breaker plate. Pressure-type tooling should be used for small-gauge wires, and the melt temperature should not exceed 170°C (refer to the extrusion temperature profile).

Location	Barrel Zone I	Barrel Zone II	Barrel Zone III	Barrel Zone Ⅳ	Die head mold
Temperature (°C)	100±10	120±10	135±5	145±5	150±10

Due to the product's specific structure, pre-crosslinking may occur if the material remains in the barrel for an extended period. Customers are advised to avoid prolonged residence times in the machine. If pre-crosslinking occurs due to stagnation, purge the material from the machine; normal operation will resume upon reloading fresh material.

PRODUCTS

About us

Customer services

Sell on RUILONG