Product Information:

To determine the bursting strength and distension of woven, knitted and non-woven fabrics, paper and carton boards by application of hydraulic pressure under a rubber diaphragm, thus to transfer the pressure to the test specimen.

Four test modes are included:

A.     Automatic Bursting Mode: Specimen bursting is controlled to be within 20±5 seconds.

B.     Fixed Flow Rate Bursting Mode: Flow rate can be set to meet different test methods.

C.    Target Distension Bursting Mode: Specimen can be inflated to a fixed height and hold for a desired time to determine the specimen strength.

D.    Target Pressure Cyclic Mode: Specimen can be inflated (UP) and deflated (DOWN) by some cycles, inflation and deflation flow rate can be controlled and UP hold time and Down hold time can be set as desired to determine the extension and bursting of the specimens.

Test Scopes: Knitted, woven and non-woven fabric, paper and cardboard.

Testing Standards:

AS2001.2.4, ASTM D3786-06，BS 3424-6-B，EDANA ERT 80-4.02，EN 12332-2, GB/T 7742.1, ISO 13938-1，ISO 3303-B，WSP 030.1.R3 (12), WSP 030.2.R3 (12)

Specification:

a)     The Maximum pressure capacity: 6000kPa (800PSI)；

b)     Max. Distension: 70mm；

c)     Test Bells: Diameter: 30mm、Diameter: 30.5mm、Diameter: 31.5mm、Diameter: 35.7mm、Diameter: 79.8mm、 Diameter: 112.8mm；

Order information:

RF306BPlus    Hydraulic Autoburst (Floor Type)

RF306B/1        Diaphragms (pack of 10pcs)

RF306B/2          Bell and clamping ring set: Diameter: 30mm

RF306B/3          Bell and clamping ring set: Diameter: 30.5mm

RF306B/4          Bell and clamping ring set: Diameter: 31.5mm

RF306B/5          Bell and clamping ring set: Diameter: 35.7mm

RF306B/6          Bell and clamping ring set: Diameter: 79.8mm

RF306B/7          Bell and clamping ring set: Diameter: 112.8mm

RF306B/8          Bell and clamping ring set: Diameter: 31mm

RF306B /9          Diaphragms with 1mm Thick (pack of 10pcs)