Commerical & Industrial Solar Storage Systems
Power your business, Non-Stop
iPower Station Series
Scalable commercial & industrial storage for non-stop operations.
Intenergy iPower Station is our commercial and industrial energy storage line, built for businesses that cannot afford downtime. It comes in two ranges.
Station Stack, rated 20–50kW and 40–208kWh, is an outdoor IP66 unit that can sit in the open without a shelter.
Station Core, rated 50–500kW and 100–1000kWh, is an indoor system for factories, campuses and industrial parks.
Both share one architecture: PCS, MPPT, STS and EMS integrated into a single unit, with AC and DC cleanly separated for plug-and-play deployment and two-way expansion. Smart ports accept grid, diesel generator and wind input, so the system works with whatever power you already have. A-grade cells, real-time BMS monitoring and multi-layer redundant control protect the whole chain, while optimized thermal design and maintenance-free key components keep lifetime costs down.
From a single shop to a full industrial park, iPower Station keeps your operation running.
Power Your Business, Non-Stop.
Thermal Separation
Alternative products 9.5KW of heat generated inside the cabinet
Structural Separation
Installed using familiar PV installation methods.
with battery-side wiring pre-installed at the factory
1.Hybrid architecture with clear DC and AC separation
Uses AC-DC separation with plug-and-play installation and deployment
Five core technologies behind iPower Station
iPower Station 0KW of heat generated inside the cabinet
4-in-1 centralized controller
One central controller
One CPU
Smart Port
Smart port enables multiple energy source inputs, including grid-tied inverters, diesel generators and wind turbines.
No extra STS module required
Supports seamless grid-on/off switch with
<10ms backup, Up to 6 units in parallel -no system cabinet required.