Mini 6-12 Core Horizontal Fiber Optic Splice Closure (1-in-1-out)
Mini dome and horizontal inline closures for FTTH drop points, small branch joints and CCTV fiber backbones. IP68 waterproof, mechanical seal, ready for aerial, pole-mount and duct installation.
Two compact designs, both tested to IP68. Choose the dome type for aerial or pole mounting, or the horizontal inline for direct burial.
Compact horizontal closure, 1 inlet 1 outlet, mechanical seal. Perfect for FTTH branch points and small drop cable joints.
Even more compact version for tight spaces - street cabinets, building entrances and aerial drop points.
Standard values across our 12-core closure series. Contact us for custom dimensions or test reports.
| Parameter | Value |
|---|---|
| Fiber Capacity | Up to 12 fibers (single-mode / multi-mode) |
| Splice Trays | 1 x 12-core tray (stackable up to 2 trays) |
| Cable Ports | 1 inlet + 1 outlet (expandable to 2+2 on request) |
| Cable Diameter Range | 5-12 mm |
| Sealing Method | Mechanical (gel seal, re-openable) |
| Protection Rating | IP68 |
| Operating Temperature | -40 C to +65 C |
| Housing Material | UV-stabilized PP / ABS / PC |
| Installation | Aerial, pole-mount, wall-mount, duct, buried |
| Standard | ITU-T G.657A1/A2, IEC 60794-1, Telcordia GR-771 |
Where our customers deploy the 12-core closure.
Connecting feeder cable to drop cable outside apartments, offices and small businesses.
Splicing fiber links between cameras and NVR cabinets in city surveillance projects.
Pole-mounted joints along aerial routes in villages and suburban areas.
Mechanical seal uses gel rubber plugs that can be re-opened and re-used when you need to add fibers later. Heat-shrink seal is cheaper but one-time - once heated, it cannot be reopened without cutting.
Yes. Both models are IP68 rated and rated for direct burial. We recommend the horizontal type for underground and the dome type for aerial.
MOQ is 50 pcs for neutral (blank) boxes. For OEM with your logo, MOQ is 500 pcs. Sample orders of 1-10 pcs are available for evaluation.
Yes. We can print your logo on the housing and color box, and customize the splice tray layout. Lead time 15 days for 500 pcs.
Send your target quantity and destination port - we reply within 1 working day.
[email protected]